- 目錄
第1篇 鋰電工程師崗位職責
1、根據機器設備狀況及時診斷并排除故障；
2、對設備設施進行維修保養并保證其正常運行；
4、掌握公司機器設備使用情況，定期對設備進行巡查，發現問題及時處理；
5、認真做好預防性維修計劃及巡查工作，嚴把設備質量關；
6、掌握供電設備運行和照明情況，制定節電措施；
7、負責公司機器設備的保養、維護、維修；
8、負責公司各項行政維修。
第2篇 鋰電池研發工程師崗位職責
鋰電池研發工程師 job description
position: design engineer – lithium ion battery
department: engineering - asia
working location: shenzhen
direct supervisor: director engineering - asia
summary
? responsible for pack & module system design of lithium ion batteries.
? responsible for design review of lithium ion battery cells.
? responsible for supplier qualification of lithium ion batteries.
key responsibilities:
1. responsible for pack & module system design of lithium ion batteries.
2. responsible for design review of lithium ion battery cells.
3. responsible for supplier qualification of lithium ion batteries.
4. lithium ion battery bom and cost analysis.
qualifications:
1. minimum 7 years work experience in battery manufacturing industries, minimum 5 years in lithium ion battery industry, automotive industry experience also required.
2. must have been worked actively in design of lithium ion batteries in the past experiences.
3. knowing about design tools such as solid works, autocad, etc.
education:
university, minimum bachelor degree, prefer master degree in engineering.
language:
fluent english both speaking and writing job description
position: design engineer – lithium ion battery
department: engineering - asia
working location: shenzhen
direct supervisor: director engineering - asia
summary
? responsible for pack & module system design of lithium ion batteries.
? responsible for design review of lithium ion battery cells.
? responsible for supplier qualification of lithium ion batteries.
key responsibilities:
1. responsible for pack & module system design of lithium ion batteries.
2. responsible for design review of lithium ion battery cells.
3. responsible for supplier qualification of lithium ion batteries.
4. lithium ion battery bom and cost analysis.
qualifications:
1. minimum 7 years work experience in battery manufacturing industries, minimum 5 years in lithium ion battery industry, automotive industry experience also required.
2. must have been worked actively in design of lithium ion batteries in the past experiences.
3. knowing about design tools such as solid works, autocad, etc.
education:
university, minimum bachelor degree, prefer master degree in engineering.
language:
fluent english both speaking and writing
第3篇 鋰電pack工程師崗位職責職位要求
職責描述：
性別：不限|駕照：不要求
崗位職責:
鋰電pack工程師2名
：
1、電子、通信及相關專業，重點大學本科以上學歷，3年以上工作經驗；
2、了解電池管理系統控制原理及軟件與硬件設計知識；
3、了解電池熱管理、電池均衡管理、工藝設計知識，軟件工程，控制理論，電力電子，
電化學及模擬電路等知識；
4、掌握codewarrior、matlab、ansys、altium designer、canoe等電池管理控制器開發
設計及仿真軟件；
5、了解本專業設計和試驗標準、國家相關法規，研究設計技術和方法，有編寫有關的技
術標準的能力；
6、了解國內外本專業技術發展動態以及競爭對手產品技術水平；
7、了解產品開發與發布流程。
8、pack樣品制作與測試，測試設備的操作及軟件日常維護，對pack組裝測試出現的電性異常做及時維修處理
職位要求:
1.本科以上學歷，電化專業或流體力學專業者優先；
2.有三年以上磷酸鐵鋰或三元鋰pack設計經驗；
3.能夠獨立解決結構件在制作工程中出現的各類問題；
4.能夠熟練使用autocad、proe軟件等；
5.熟悉產品開發流程，能夠承擔鋰電池pack的結構設計；
崗位要求：
學歷要求：本科
語言要求：不限
年齡要求：不限
工作年限：經驗3年
