第1篇 cad結構工程師崗位職責
cad engineer(結構工程師) 職位需求:
- 全日制本科及以上學歷;
- 3年以上產品結構設計研發經驗,重點是塑膠成型設計經驗。
- 懂一定的曲面設計。
職位需求:
- 全日制本科及以上學歷;
- 3年以上產品結構設計研發經驗,重點是塑膠成型設計經驗。
- 懂一定的曲面設計。
第2篇 cad結構設計工程師崗位職責
崗位職責:
responsibilities:
-p1 product component technical definition respecting quality, cost and lead-time targets
-define studies or pre-studies in cad,
design his own part/component relative to specifications or cad elements given by ptm r&d/design leaders, and responsible of its definition (design rules, manufacturability, mechanical/thermal constraints, style, …)
-responsible of the good application of branch standards & regulations rules, cad methodology rules, design guidelines, cad quality rules, checklists and design quality control.
-responsible of lead-time/costs of his tasks (efficiency and timing follow-up) by respecting projects milestones/dead line, and cad engineers/operators follow-up if any under his lead.
-validate & follow-up of all cad data concerning his (or her) component inside vls branch pdm/plm systems.
-design mechanical validation by simple fea tools integrated in cad software.
-design competences improvement
-participate to design efficiency & quality improvement in working group. may lead the working group.
-proficient in cad software, responsible to monitor/improve cad performance/product knowledge level of cad engineers/operators under his lead for his component technical definition.
-ensure good application of n+1 requirement.
任職資格:
requirements:
-knowledge of cad software or product design.
-experience in lighting design & knowledge of mould
-at least 3 years working experience in lighting design, headlamp design experience prefer.
language:-good command of english
